1 / 2
My Minor Remix of Micro Center's Updated JST Connector Pliers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minor remix of Micro Center's Updated JST Connector Pliers. I made the head a bit narrower, and added a wedged bite.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 156
- Wydruki
- 6
- Wyświetlenia
- 943
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (0)Kolekcje (44)Powiązane
Minor remix of Micro Center's Updated JST Connector Pliers. I made the head a bit narrower, and added a wedged bite. I printed it on my Bambu Labs X1 Carbon, with Bambu Labs Clear Black PC filament, using a 0.4mm nozzle, and the default Bambu Studio's 0.20mm Strength settings.
For additional hardware, I used an M3*12 screw with a Nylon Lock nut.