Wardrobe Filament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Suspended Filament Holder, modified so that it uses metric M4 x 16 screws and 22mm OD PVC pipe.
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the Suspended Filament Holder, modified so that it uses metric M4 x 16 screws and 22mm OD PVC pipe.
The Parts Required for 1 Filament Holder are:
1 x LH Side
1 x RH Side
1 x Top Support
2 x End Stops
4 x M4x16 Cap Head Bolts
1 x 120mm long 22mm OD PVC Pipe
It takes around 6.5 hours to print on a Prusa Mk2, and 5 minutes to assemble.
Print instructions
Parts have been printed with the same settings as original, apart from the infill density has been increased to 20%.
LH and RH Sides have been printed with Honeycomb structure with no top or bottom layer, this is personally for visual effects.
Others parts are standard settings on Prusa Silcer.