1 / 4
50ccm Scooter Oilpan Oilchange 1l — zdjęcie 1
1 / 4

50ccm Scooter Oilpan Oilchange 1l

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An oilpan which holds about 1l (a bit more actually) to change the engine oil on your 50ccm scooter.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

“Oil is cheap, engines are expensive”

This is why you want to change your engine oil regularly- not only on your car, but also on your little 50ccm scooter.

This is what I wanted to do as well, and because I didn't want to use a regular kitchen bowl for this, I quickly designed a basic pan that would solve the problem.

I think it's best to print this in PETG, because before changing your oil, with most scooters you're supposed to warm up the engine, which is why the oil is quite warm when flowing into the pan. But if you only have PLA, I think it should work too.
I printed this with a 0.3mm layer height, because it doesn't have to be detailed, it just has to work- which it did ;)

Tagi