Pimax Wilcox NVG Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had the Idea to mount a VR headset using an NVG mount for years and finally got around to implementing it. While the…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 2527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Had the Idea to mount a VR headset using an NVG mount for years and finally got around to implementing it.
While the end result is functional, the massively increased weight makes it rather impractical as it is quite front heavy, even with counter weights.
It also doesn sit tight enough with my face, although that is something I could fix using google straps or something similar to pull it to my face.
Assembly requires 3 M4x20 screws and 3 M4 nuts. You also need a Helmet as well as NVG mount using the Wilcox Dovetail system obviously.
When attaching make sure the mount clicks securely into place, depending on your print settings and material this might require a little bit off force.
USE AT YOUR OWN RISK, I AM IN NO WAY RESPONSIBLE IF YOU BREAK YOUR HEADSET OR ANYTHING ELSE WHILE USING THIS.
Print Settings
Printer:
Bibo 2 Dual
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
50%
Filament:
Bibo PLAWhite
Category: Video Games