1 / 4
18650 Lithium Ion Battery Holders with F3D for customization — zdjęcie 1
1 / 4

18650 Lithium Ion Battery Holders with F3D for customization

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

18650 Lithium Ion Battery Holders with F3D for customization

Ocena
0 / 5
Polubienia
2
Pobrania
51
Wydruki
0
Wyświetlenia
373
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

18650 Lithium Ion Battery Holders with F3D for customization

 

The model is available for free download and use.

If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:

https://www.paypal.com/paypalme/avicode

 

Battery Charger C.stl should be printed in Vase / Spiralize Mode

Battery Charger H.stl should be printed without supports and is an easy print. It holds 18650 Lithium Ion batteries snugly and you will want to push in the wires through the holes BEFORE squeezing the batteries in as they are very hard to take out again.

This allows wiring up batteries without having to weld the batteries as the connection is held securely.

The circuit diagram helps switching the batteries from series to parallel. So we can put them in parallel for charging and series for usage at 2X Volts.

Use at your own risk of course.

Please be safe and smart when handling Lithium Ion Batteries.

DISCLAIMER: I can't be liable for any damages.

 

Thanks!

Tagi