Nordic Acoustics wood and wool panel cable management
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small cable management guide to stick big electric cable between two wood piece of Nordic Acoustics wood and wool panel.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 1998
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
Backstory
I recently bought some wood + wool panel from Nordic Acoustics to redo a wall of the home studio and the previous home owner though a power socket at 1m60 was a good idea because … reasons. So now I have my cables just hanging like that and I'm really unhappy. Fortunatly, I have a 3D printer! So I can create some cable management solution to be able to stuck the cable in a wool gutter, between two pieces of wood. Printing it in black and tadaaa.
Files
There's 3 different files to handle different tolerence since the woof placement isn't quite mm perfect 😅
3MFs folder:
- 14,5 mm gutter
- 15 mm gutter
- 15,5 mm gutter
Outside of folders
- just one file, with all the different size in it. Just mask the ones you don't want (right click on them on PrusaSlicer) and add instance of the one you want more than one (+ key on PrusaSlicer)
P.S: on schematic, gutter is 15mm, but in practise, I found out it's a little bit more like 14 something. Then you need to add a bit of constraint, that's why the original file is 14,5mm. Gut since the conception is a bit … line worky, I had to made some adjustments
Printing
Slice & print on the back of the piece. No support, no raft, nothing 😉
PLA with 15% infill is perfectly fine.