Mountiing Channel for LED Strip (7.6mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This channel utilizes a 1/2" PVC pipe as a shroud to an LED light strip.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This lamp was built for a specific need but could be used elsewhere. The shroud hides the individual LED elements but allows light downward.
The channel is only 279mm (10.98") long. This is because it was the limit of my Prusa MK3 bed size.
½" PVC pipe is common in the US. Its actually dimension is 21.5mm OD, 15.4mm ID and 3mm wall thickness. Cut into quarter strips on a table saw. I made a jig to be safe. The strip happens to snap fit into the 3D printed channel.
See my IG posting for build steps. https://www.instagram.com/p/Cpp2DZeJl8D/