Simple stands for uSDR/uSDX 8-band SSB/CW QRP TRANSCEIVER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put your uSDR/uSDX at 20 degrees to avoid scratches in the box and a better operation.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 1036
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
You can print two pieces for get a good stability.
This stands is usefull for put your uSDR/uSDX (only for the model showed in the pictures here) at 20 degrees of elevation and avoid scratches in the box.
It can be printed with any filament, with 0.2 mm or 0.3 mm. Not much infill is needed: 10% or less is firm and safe.
It's my first 3D model using TinkerCAD but it's really functional (almost for me). I hope ypur comments for improve this model together.
Donations for beer or coffe than welcome via:
Paypal: https://www.paypal.com/paypalme/ftomasczik
Cafecito: https://cafecito.app/ftomasczik
Remeber visit my Blog at https://lw3esh.blogspot.com (sorry, only in Spanish) for notes about radio and ham radio in general.
