1 / 9
A Wireless Phone and Airpods Charger Updated 9 October — zdjęcie 1
1 / 9

A Wireless Phone and Airpods Charger Updated 9 October

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a wireless charger for mobiles phones ans Airpods.

Ocena
0 / 5
Polubienia
1
Pobrania
28
Wydruki
0
Wyświetlenia
314
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a wireless charger for mobiles phones ans Airpods. The height of charging coil holder can be adjusted to work with different types of phones
Update: updated the PCB holder bay for a snug fit, increased the length of the arm and body to enable coil adjustment for use with different size phone

Print instructions

The phone must have a cover of some type to give it some thickness to push the trigger down without slipping. The charging coil and circuit (Qi Wireless Charging Reciever Charger Module) is available at Amazon and Banggood for around US $6. You will also need two 3mm dowels or pins or hanger wire, or a piece of 2.8mm 3d filament for moving joints. The parts will need support and the arm and trigger need to be placed on their side to print. I also put four magnets in the trigger for adding weight but play dough or lead would be fine as well. You will also need two hook wires to extend the connection from the coil to the circuit board.

Tagi