Ender 3 dual z PSU mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapterplate to remount the old 50mm thick PSU at the L-frame.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 731
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The original dual z upgrade kit from Creality comes with an "L-shape" metalbracket to mount the PSU on the lower aluminium frame.
Unfortunately the orientation of this bracket is not ideal, a lot of space is wasted. Moreover I was not able to mount Z support rods below the PSU.
This adapterplate remounts the old 50mm thick PSU 23mm upwards and 18mm to the left so that the “L-shape” metalbracket from the upgrade kit can be twisted by 180°. Now the PSU no longer protrudes beyond the aluminum profile.
Additionally I created a little 36,5mm high support block, which just clips beyond the PSU to stabilize it.
Additional materials :
- 2x M4x12mm screw
- 2x M4 nut