Magnetic Shower Head Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic shower head van mount for a rechargeable camping shower
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 631
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount fits a “Camp4 Camping-Duschset mit Akku-Tauchpumpe” (Camp4 camping-shower-set with battery powered submersible pump). The mount this comes with is garbage, so a replacement was necessary. This will probably not fit other models of camping showers, because they seem to differ in that area, but you can make it fit if you measure your shower head and modify “Teil1.stl”.
Materials
2 x 32 mm pot magnets with screw hole
2 x M4 x 10 countersunk screws
2 x M4 hex nuts
1 x M8 x 16 hex head screw
1 x M8 hex nut
Print Info
The main parts are printed in ASA, 5 perimeters, 40 % infill. Use a brim for adhesion. Supports are not strictly necessary, but I did use some for the screw holes. I did acetone vapor smooth the parts, but that is optional.
The scratch protection washer is printed in TPU and glued on using 2-component epoxy glue.