Angle Shims for the Multifunction Arm mounting system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shims to fine-tune your multifunction arm angle. Big and small versions, 1-5 degrees angles.
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1855
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The Multifunction Arm system is fantastic, but, being made from plastic, not 100% rigid.
Gravity, on the other hand, is a bitch, and won't hesitate to flex and bend the system until your screen or other device on the end of the arm is not exactly straight anymore. Fortunately, by placing one of these shims in your setup, you can compensate for the sag and get your devices to hang straight.
The shims are meant to go in between the parts that are screwed together (see photos).
For an accurate shape, use low or variable layer height with ≤0.15mm at the top.
F3D and .step files included.