1 / 1
Frosthaven Magnetic Plate for Magnet Standees — zdjęcie 1

Frosthaven Magnetic Plate for Magnet Standees

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic Plate to hold frosthaven standees.

Ocena
0 / 5
Polubienia
6
Pobrania
43
Wydruki
0
Wyświetlenia
1143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

I created a plate to hold the magnetic standees for frosthaven from  Michal Stříž design:

https://www.printables.com/de/model/369265-perfect-gloomhavenfrosthaven-standee-set-with-magn

It fits exactly the same amount of standees as frosthaven has orginally, which are:

  • 8x Gold/Yellow (elite monsters)
  • 16x White (standard monsters)
  • 8x Blue (Summoned monsters)
  • 2x Red (Boss monster)

In the remaining two slots you can place 10hp plates (I use 8 of them, since this should be enough for nearly all cases).

You will need 16x 8x3 round magnets, like these for example:

https://www.amazon.de/Yizhet-Minimagnet-Supermagnete-Haushaltsmagnete-Pinnwand/dp/B074C79DJS/ref=sr_1_1_sspa?keywords=magnet+8x3&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

 

In the appended gcode file your printer will stop at the correct time to insert the magnets.

 

Important: Make sure the magnets have the same directions as the standees! Otherweise they will repell each other.

Tagi