Protective nozzle for baby nose blowing with physiological saline solution - TPU quick and easy print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your baby while blowing his nose with this printed nozzle that gently seals without going deep in the nose
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Physiological saline tubes are too sharp to be inserted into a baby nose, they can reach too deep in the nose and may hurt the baby, causing him nose bleed.
Not eliminating the mucus would increase breathing difficulties, sleep disorders and may even cause lung infections, so that is not an option. Blowing babies nose often requires a light liquid pressure build-up, to dislodge large accumulations of mucus.
So I drew this protective nozzle in Blender, making sure I get a good fit on the physiological saline solution tube and also a gentle and smooth seal on the nose side, without entering deep into the nose.
The results were great, so I added an adult size nozzle that fits the same physiological saline solution tube in case you want to try it yourself...
I sliced it in PrusaSlicer using my standard TPU settings : 0,3mm first layer, 0,2mm layer height, 10% gyroid infill and 2 perimeters at a speed of 20mm/s with a 235°C nozzle temperature. No supports, but some 3DLAC on the bedplate. Prints in 20 minutes and uses 2g of material.
WARNING and DISCLAIMER: print it as you like, but use it at your own risk, I provide no warranty and I decline any and all liability whatsoever. If you have doubts, ask for actual medical advise, this is NOT it.
I wish you a happy printing an free breathing !