1 / 2
Lego Duplo 10x10 brick half height (easy print)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10x10 "plate" brick, half height of the standard duplo block. No support, easy print.
- Ocena
- 4,667 / 5
- Polubienia
- 30
- Pobrania
- 365
- Wydruki
- 3
- Wyświetlenia
- 961
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (1)Kolekcje (50)Powiązane
- easy print (PrusaMINI fits)
- no supports
- exact dimension with the original
- blocks can be connected from both sides (it's not just the base plate)
- recommended print resolution: 0.2mm