Thrustmaster T.Flight Hotas X chair attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thrustmaster T.Flight Hotas X generic office chair attachment
- Ocena
- 0 / 5
- Polubienia
- 73
- Pobrania
- 242
- Wydruki
- 0
- Wyświetlenia
- 4149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Thrustmaster T.Flight Hotas X for my office chair, easily adaptable for most chairs - just put some foam between chair_clamp_bdy1 and chair_clamp_bdy2 and scew it tight.
The elements named right and left are simmetrical except for the holding plates (different sizes)
Screws list for 3d printed elements:
chair_clamp_bdy1 + chair_clamp_bdy2
- 4xM6x65 D912:screw, nut, washer
chair_clamp_bdy3:
- 4x M5x35 D912: screw, nut, washer
holding_plate_grip_bdy1 + holding_plate_grip_bdy2:
- 2x M5x35 D912: screw, nut, washer
holding_plate_bdy_v2_right / holding_plate_bdy2_v2_left
- 2xM4x30 conical screw, nut, washer (for the plate)
- 1xM5x35 buttery fly screw, M5 15mm length (DIN 6334) coupling nut, washer
- rubber ring between this and holding_plate_grip_bdy2 will make it more flexible
some M4 nuts for attaching the joystick to the plates: see joy_holder_bdy1
Use the holes in plates to match your joystick screwing system if possible.
Additional items:
- 2x 15mm rods with 120-180mm length - for connecting chair_clamp_bdy3 with holding_plate_grip_bdy1 + holding_plate_grip_bdy2