Apple Watch Band Storage Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple Watch Bands seem to multiply. This storage system is seamlessly expandable, fast to print, and adaptable.
- Ocena
- 4,5 / 5
- Polubienia
- 110
- Pobrania
- 447
- Wydruki
- 6
- Wyświetlenia
- 2714
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Apple Watch bands seem to multiply. This storage system is seamlessly expandable, fast to print, and adaptable. I made these slots to be slightly angled so you can see the band easier from the front or the side. The slots are also designed to be combined with a duplicate print so they don't waste any space.
Print the bracket as shown in the .gcode file with the slots facing up (the large flat rectangular side down), and the brackets with their flattest side down.
I used small command strips to mount the brackets to my dresser, and Cyanoacrylate (“Superglue”) to secure the brackets to the band holder.
The profile for the slots is straight from Apple's own design files, so any watch band that slides into your watch should fit no problem.
This model was designed to be printed on a Prusa Mini+, but should work on almost anything larger than 170 mm.