1 / 5
Fish Chain Cat Toy print in place - Challenging Print — zdjęcie 1
1 / 5

Fish Chain Cat Toy print in place - Challenging Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a articulated flexi fish on a print in place chain

Ocena
5 / 5
Polubienia
53
Pobrania
306
Wydruki
3
Wyświetlenia
1173
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

Saw one similar but it required a ton of support. so I fabbed up this one that requires no support at all. used the chain customizer and the artsy fish in tinkercard merged them with a simple handle to make a one piece print in place cat toy

BE WARNED you are quite literally trying to print nearly 50 separate parts simultaneously and worse 45 of them are have a TINY foot print on the platten. Have fun :-) took me a couple tries to get those first layers to stay put :-)

The hold down tabs for the handle just tear off with your fingers when its done.

My cat seems to enjoy it :-)

If you have a smaller bed say 200x200 it should be fine to resize it slightly to fit in the bed dimensions. in fact the one in the attached picture was resized to 200x200 to fit that particular machine.