1 / 6

45 RPM / 7 inch Record Zoetropes

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A couple of fun mini-zoetropes for spinning on a record player, in two sizes with strip templates.

Aktualizacja u źródła: 26 mar 2024

Informacje o modelu

Amuse yourself with antique-style animation as your music spins, with either:

Small (38mm) - single print with depression for an optional M16 washer for a little extra weight.
Large (84mm) - two-part print with 38mm puck and zoetrope that covers the label area. Strips fit in snugly against a stop on the inside rim.

Settings are very ordinary - 0.2mm layers, 2 perimeters, 15% infill are fine. If you want
Try lots of perimeters or more infill if you want a bit of weight.
Concentric or Archimedian Chords for top infill are nice for a look that echoes the tracks on the record.
Any rigid filament would be fine - I used PLA.
Black is a good choice for colour, but white would also work well for brightening up the inside if you paint the outer side black.

If there's stringing between viewing slits, it's best to clean that up with a sharp blade.
If the spindle hole is too tight to fit then it can be enlarged with a small rod wrapped in sandpaper or a round needle file.

Try the example strip of dancers or use the template SVG files as guides to arrange your own sequences.
Look for taller rather than larger frames of animation to make strips from.
Print at 100% for accurate scale. (large strip needs landscape orientation when printing on A4 or Letter.)
Ordinary 80gsm printer paper will do fine.