Mario Brick Tea Holder for Ikea Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double jump through your day with this Mario themed tea holder for your Ikea Skadis.
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 2640
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The newest addition to the Mario themed accessories for the Ikea Skadis is finally here! This had been requested for a while, the contest finally motivated me enough to knock it out. I tried to make it to where supports are not needed but was not able to figure it out in the one day I gave myself to work on this. The peg hooks need supports, but nothing else does as all the angles are 45 degrees or less. PrusaSlicer wanted to add them up to the second layer of bricks and the arch on the front, so be sure to block supports for those sections if you slice it yourself. Also be sure to flip the optional lid on its top (brick side down) so you won't need supports for it either. Printed with Inland Brown PLA, at 0.2 mm layer height and 15% infill. Dispenser holds two different teas with packages up to 67mm (2.64") X 79mm (3.11").