FX Dreamline Safety Plug / Safety Flag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This FX Dreamline plug will block the action from closing. Print this in PETG bright orange to use it as a safety flag.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 814
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a safety plug for the FX Dreamline. It should fit any caliber and version of the FX Dreamline.
The plug locks the action open by preventing the pellet probe from closing forward.
I don't like this personally since a cocked rifle is less save then an uncocked one but I am not making these rules. So here is a HFT/FT compliant “safety” plug.
Required Parts:
1x 2x2mm Oring
Print this in PETG so it doesn't melt in the sun. Also set the bottom layer to be at least 2mm thick. This blocks the pellet probe and ensures the probe will not crush the safety plug.
The .3mf file contains a modifier to add a thick plate where the pellet probe is while using regular infill for the rest of the plug.