Dual X-axis linear rails for LumenPnP v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increase the rigidity of the toolhead on the X gantry by using two linear rails!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 827
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
To increase the rigidity of the LumenPnP (v3) toolhead, I decided to modify Stargirl's excellent linear rail mod (https://www.printables.com/model/278803-lumenpnp-linear-rail-mods-v3) to support dual linear rails for the x-axis. This allows me to place 0402s more accurately.
Although the situation was improved by switching from v-slot rollers to a single linear rail, the toolhead was still able to flex a little, affecting accuracy in the y-axis. The v3 cable chain, especially, would cause the toolhead to twist a little.
The x-gantry-block-mount was modified from Stargirl's linear rail mod to be a bit stronger, and to be a closer fit for M5 nuts (they were a bit loose). The x-gantry-back part was modified from the LumenPnP part.