Large Light Ball, Christmas, Holiday, Decor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First off I usually don’t share what I make because… most of the stuff I make isn’t pretty and is just to service a…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
First off I usually don’t share what I make because… most of the stuff I make isn’t pretty and is just to service a purpose of one kind or another.
I can’t say it turned out exactly like I wanted it to and I’m sure it can be improved on. I made it to print on my CR-10 but, my calculation on the brim/skirt wasn’t right so you will need to resize it to 99%.
When putting it together you will want to start with the inner ring then middle and you guested it the outer. Once you have it put together I found when putting the lights on making a diamond/circle with the strand of lights around where each ring/circle meet made it more stable. Not sure if I’m making any sense there but hopefully I am.
The smaller ball is located here https://www.thingiverse.com/thing:3220485
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Filament:
ThriftyMake PLAblack
Category: Decor