Glass Carboy Storage Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cap for a standard glass carboy.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This prints a simple cap for a standard glass carboy, used for when I need to put the carboy into storage, in between brews. It should fit different sized carboys as long as the external diameter of the bottle neck is approx. 54 mm.
I made it so it fits quite snug, and will require a bit of a pull to pry off. Nevertheless it's probably not enough for it to be really airtight, although I suppose with an extra layer of silicone it might do the trick.
DO NOT use this cap with anything brewing or fermeting inside the carboy: either this cap will come flying off or (unlikely but worse), your vessel will explode.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Generic PLA White
Notes:
Top/Bottom pattern: Zig Zag
Fill Gaps Between Walls: Nowhere
Combing Mode: Off
Category: Containers