Flysight Falcon FG01 Pro58 FPV Tilted Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by previous models, although drawn from scratch using the original flysight cover step file. The difference…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Inspired by previous models, although drawn from scratch using the original flysight cover step file.
The difference is in the angled mounting of the module to allow much better access to the rotary switch, the pins have been extended as others have done using a 90degree 0.1" pin header soldered to the existing pins. Nothing was cut down.
Extra tabs included to help secure the cover, and I've broken off the original tabs on my goggles.
The wedge is included to support the module with double sided tape at the new tilted angle.
The holes are big enough to let the SMA connectors tighten down without touching, and there is a small support between them on the inside to help secure the module.
Printed in PLA with 0.2mm layers. No support needed.
Category: R/C Vehicles