SmartiPi Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to mount a Raspberry Pi and screen inside a SmartiPi Touch case on top of the Prusa Original Enclosure
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a bracket to mount a Raspberry Pi inside a SmartiPi case on top of the Original Prusa Enclosure. It includes a hole that lines up with the hole in the top of the enclosure through which you can guide wires. You do however need to modify the SmartiPi base by cutting a hole through it at this location. I recommend attaching the bracket to the base of the case, then drilling through the hole in the bracket. Once you've drilled, use a file to shape the plastic to match the shape of the hole in the bracket.
You'll need the following hardware:
- 4x M3 hex nuts
- 6x M3x12 machine screws
- 2x M3s square nuts
Insert the square nuts into the slots provided. Push the hex nuts into the indents, and screw the case base down onto them with the machine screws. Place the assembly on top of the enclosure so that the cable hole lines up with the hole in the centre front of the case. Insert machine screws from under the enclosure's lid into the square nuts and tighten down.
Optional final step (not completed on my case) tidy up the tools on top of the case, and the random bits of filament garbage next to the printer!