1 / 2
Caulk Tube Nail Plug — zdjęcie 1
1 / 2

Caulk Tube Nail Plug

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rust proof plug for caulking tubes

Ocena
0 / 5
Polubienia
20
Pobrania
133
Wydruki
0
Wyświetlenia
479
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Summary
I don't do a lot of caulking but when I do the nozzles on my used tubes seem to always be clogged. Caps don't work, short plugs don't work, etc. The only thing I find that works for me are large long nails that I put into the end of the nozzle that extend down into the tube. My issue is that over time my nails tend to rust. I then end up waisting a significant amount of caulk each time just to get the rust infested part out of the tube.

These caulk tube "nails" are designed to solve the problem. They are designed to be shaped like a nail, are long enough to insert into the end of a standard caulk tube nozzle, and will extend past the nozzle length down into the tube area.

I would also suggest printing the nail in the color of the caulk for quick identification.

Print Settings
Printer brand:
Prusa

Printer:
i3 MK3

Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Filament brand:
Generic

Filament color:
Any

Filament material:
PLA

Notes:
2 Versions: Horizontal | Will print a little faster and be a little stronger since the filament runs parallel to the length of the nail. Vertical | maintains full cylindrical shape, but will print slower and not be as strong along the length which might lead to broken sections stuck in the nozzle.