1 / 4
Xiaomi camera 360° cover blinder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover and blinder for Xiaomi camera 360°
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
Cover/blinder for Xiaomi camera 360°. Camera is mounted in base part and if needed it can be covered by screwable cover.
3D printed parts:
Base part:
- layer height: 0.2 mm
- supports: optional (recommended for USB connector opening)
| File name* | Comments |
| Base_woodScrew_V1 | Default version, used with wood screw 3x12 mm (or longer) |
Cover part:
- layer height: 0.2 mm
- supports: no
- brim: recommended 10 mm
| File name* | Comments |
| Cover_woodScrew_V1 | Default version |
*Models are usually released as .stl and .step
---------------------------------------------------------------------------
BOM:
- Camera
- Plastic mount included in camera package (replacement can be found also on printables.com)
- 3D printed base and cover part
- 4x wood screw 3x12 mm (or longer)
---------------------------------------------------------------------------
Assembly:
- Screw 3D printed base to desired location with 2 screws (use countersink holes).
- Add plastic mount from camera packaging and screw it through base with 2 screws (use non-countersink holes in base part).
- Mount camera to it's plastic mount. Please see camera manual. Pay attention to position of camera to get USB connector and hole in base part aligned once camera is mounted. Be careful to not apply too much twist force to upper part of the camera - it can break end-stops inside the camera body.
---------------------------------------------------------------------------
Updates:
23.03.2023
- Initial release
- Cover and base part for 3 mm wood screw