Printable Pun - Just In Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support free, print in place pun tool case with a test slice and multi-material options
- Ocena
- 5 / 5
- Polubienia
- 168
- Pobrania
- 1045
- Wydruki
- 27
- Wyświetlenia
- 4094
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I heard this joke and loved it so much I had to retell it… Just In Case.
The design aims to look like a tiny tool case. It prints in place with a moving hinge and handle. I’ve included solid and multi-material versions. If you shoot a single extruder, the multi-material files print out separately and glue together pretty well.
The hinge is based on a .2mm gap at a 45° angle. I’ve added a test slice of the handle as well as a backup handle at a stronger print orientation. If the test hinge sticks, scaling up should fix most issues. It prints successfully on my sloppy .6mm nozzle at a .3mm layer height, but it really works best with a .2mm.Layer/.4mm nozzle or smaller.
Feast your eye balls on more of my free and exclusive designs here: MerganMcFerganPatreon