Device box low voltage divider (Thomas & Betts - NuTek) version 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Device box low voltage divider (Thomas & Betts - NuTek) version 2 North America require a mechanical divider when…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — NoDerivatives
Device box low voltage divider (Thomas & Betts - NuTek) version 2
North America require a mechanical divider when using mains (110v) and low voltage items in the same wall box, most manufactures do make these dividers.
Can be installed in Thomas & Betts NuTek non-metallic in wall device boxes, push fit, no glue required and still allows for the cable entries to be used
Will fit wall boxes:
2-WSW / 2-FWSW
3-WSW / 3-FWSW
4-WSW / 4 FWSW (not tested, due to factory having a slighty altered box for there own divider, let me know to adjust the design)
NOTE: Thomas & Betts do make a divider (WSW-P) but will only fit the 4-WSW and 4-FWSW as these boxes are altered for that divider
Tested on a Prusa i3 Mk3S, using PET, no supports required as no overhangs
Print instructions
- PET
- 0.2
- 15% infil
Print with wider supports on the base, no printing supports required