Omar Ali Saifuddien Mosque - Brunei
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🇧🇳 🕌 Easy-to-print miniature of the main mosque in Brunei's capital, in southeast Asia.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 408
- Wydruki
- 0
- Wyświetlenia
- 2193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🇧🇳 Selamat datang ke Brunei!
Welcome to Brunei!
This model was created in Tinkercad by Dany Sánchez.
(!) See the print details & instructions below.
Brunei is a small muslim country in the large island of Borneo, in southeast Asia. It shares the island with Malaysia & Indonesia, and it's not far from the Philippines & Singapore. The Omar Ali Saifuddien Mosque is one of the country's two Masjid Negara or National Mosques, as well as a National Landmark. Located in Brunei's capital, Bandar Seri Begawan, it is named after the 28th Sultan of Brunei and the father of the current monarch, Sultan Hassanal Bolkiah. Construction took place from 1954 to 1958.
The size of the mosque is about 69 by 26 m (225 by 86 ft) and can accommodate 3,000 worshippers. It has a maximum height of 52 meters (171 ft), and a dome covered with gold. The interiors have Italian marble and imported rugs and decorations from Europe and other parts of the Islamic world.
It is almost surrounded by a man-made lagoon, in the middle of which sits the "Mahligai", an artificial barge meant to resemble a ship of Sultan Bolkiah, who reigned Brunei in the 16th century (from Wikipedia).
MiniWorld3D is excited to bring this historical model to life as a homage to all the people of Brunei. This model was designed from scratch using photos and talent! Please give credit, it's all about spreading culture and education!
Share your print photos with us!:
Consider supporting us on Patreon!
MiniWorld3D is a collective of 50+ artists creating the best library of 3D printable models of landmarks of the world!
Photo credits: @stereolab.kw, printed in white PLA and gold details in acrylic paint.
Real location photo by sam garza CC BY 2.0
----------------------
Printing Instructions:
No supports needed.
Print slow, such as 20 mm/s outer perimeter
Infill 12%
Brims or rafts recommended to ensure adhesion of small objects with low surface contact with the print bed.
Each part is provided as separate STL, which can be
- Printed individually and then assembled with glue
or - Combined in your slicer and printed as a single body
For the latter option, make sure auto z-align is disabled, so you can position certain parts above others
You can also print certain parts combined, and others separately, such as the barge and ring
The ring is located on the lagoon, a few meters in front of the barge, and is absent in the photos provided. You can look up aerial photos to guide yourself.