Rotisserie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotisserie with an Arduino controlled continuous servo.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
2x Ball Bearing, Sealed with Extended Ring, for 3/8" Shaft, for 7/8" ID | McMaster-Carr
1x 3/8-16 threaded rod - Id recommend stainless steel so it doesn't rust and it's easy to clean - it goes without saying that you need to keep it food safe!
This is printed in ASA to deal with the heat from the grille as well as the UV from the sunlight. Last summer I used the nuts I designed but switched to regular stainless nuts tightened against each other to lock in place. Where you put the support side is up to you but remember to keep it a relatively good distance away from the grill's heat.
The motor speed can be adjusted my potentiometer or code adjustment. See slow_cont.ino.