1 / 2
TARDIS Bird Feeder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A TARDIS-inspired bird feeder
- Ocena
- 4 / 5
- Polubienia
- 90
- Pobrania
- 213
- Wydruki
- 2
- Wyświetlenia
- 1614
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (112)Powiązane
A bird feeder based on the TARDIS Deluxe Kit. It's designed to hang from a wire or chain that runs through the model and terminates under the base. The lid is modified from the original kit to provide an overhang to guide rain off. Water that enters the top hole should run down the wire and drain from the bottom.
I recommend printing it in PETG for better weather resistance.