Stable Altitude Mount for Hadley Family Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the Altitude bearings on original design to make using the telescope easier
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
I, along with half the Universe, love the Hadley telescope design. However, I found it is a bit ‘wobbly’ in its original design to I redesigned the altitude bearings with greatly improve performance. Being this is a light weight telescope (the bane of all small telescopes) it doesn't have a lot of problems with friction so the plastic-on-plastic moving surfaces works well. The telescope can be moved by hand easily, but will hold its position well when released.
- #10 machine screws and nuts used for assembly
- #8 wood screws used to attach OTA to Dobsonian-ish mount
- PLA or PETG
- No supports needed
- 0.20 layer height for smoother bearing surfaces
Assembly is pretty straight forward. Pressure from cap mounting screws is adjusted to get right ‘feel’ of friction.
