1 / 3
Artillery Genius Pro Biqu H2 V2S mount with CR Touch — zdjęcie 1
1 / 3

Artillery Genius Pro Biqu H2 V2S mount with CR Touch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Biqu H2 V2S mount for Artillery Genius Pro and Sidewinder X1/X2/Genius

Ocena
5 / 5
Polubienia
16
Pobrania
121
Wydruki
3
Wyświetlenia
1850
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

It is an remix of user h19x51 model because with the original i had some little issues on my Genius Pro: 
too little space on the right side where the belt is connected to the base plate
too little space on the lower left side where the base plate hex nut is
too little space to the upper base mount screw (for the upper right roller)
the hole for the lower mounting screw was too tight for BIT tools 
the mount for bltouch was too massiv and not realy suitbale for CRtouch
for my favourite component fan duct the lower mounting arm was too long 
the cable routing was not really practical (for me)

I ingreased a little bit all mounting arms for less vibrations (i dont know if it was necessary but for my own brain…)
and still I was able to reduce the weight (nearly 20%).

should fit on the Sidewinder X1/X2 and Genius too.

bed level sensor offset:
x_offset:-2.5
y_offset:30

as bed level sensor i use the "CR Touch"

 

thanks to user h19x51 for the main work. For me i fine tuned it :-)

 

the fan duct is “the Claw” from https://www.thingiverse.com/thing:5202213