***OUTDATED CHECK DESCRIPTION FOR NEW MODEL*** Sidewinder X1 Hemera Revo XS Mount With Angled Fan Shroud/Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
these models are aimed toward mounting a Hemera Revo XS onto an SWX1. This is one of my first CADs so be nice!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
OUTDATED: This model was kinda bad so I made a new one which seems to be much better and easier to install. You can find it under my profile or here
Hello! I wanted to buy and mount a Hemera Revo XS on my sidewinder X1. I found that there is a lack of models required to mount the part, so I decided to take matters into my own hands and design one myself with my newfound CAD skills. This is my first personal CAD project, so there are probably many imperfections with it. I also don't know much about 3d printing; I would say I am a hardened enthusiast. Because of this, I am not sure if my fan model is good or if any design choices I made are right. Hopefully, this solution still works great for you. I am planning on coming out with a dual-part cooling fan setup if this one doesn't work out too well. If you have any questions, reach out to me on Discord at Shooter913b. Happy printing!