5015 Guard for Petsfang Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the original with an offset for the Petsfang mount.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remixed the original with an offset for the Petsfang mount. The front has a smaller offset than the back based on the duct I have installed so I made 2 files. I also hollowed out the center cone to save a little weight/plastic and notched the side of the housing to clear the duct bracket.
Original Design: https://www.thingiverse.com/thing:2721184
Print instructions
Category: 3D Printer Accessories Summary
Remixed the original with an offset for the Petsfang mount. The front has a smaller offset than the back based on the duct I have installed so I made 2 files. I also hollowed out the center cone to save a little weight/plastic and notched the side of the housing to clear the duct bracket.
Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 10-15
Notes:
I finished the cone at 0.12 for better layering and less supports.