1 / 4
DIY Survival Compass
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can build the DIY Survival Compass with five components
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 972
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (73)Powiązane
When do you need it:
We used this compass in a scouting game for the kids to find the next station.
What you need:
- something that floats on water and can support the weight of a needle, for instance cork from a wine bottle
- needle
- magnet
- water
- a bowl or better the 3D printed version
How to compass:
- cut a small disk from the wine cork
- Rub the tip of a sewing needle against a magnet, making all your strokes in the same direction. Any magnet will do, but the stronger it is, the better. With a strong magnet, you may only need to make a few strokes with the needle. If all you’ve got is a standard refrigerator magnet, rub the tip of the needle against it up to 50 times. Your needle is now magnetized.
- Push the needle through the edge of your cork disk and through the other side. You may want to use a pair of pliers for this part.
- Fill the bowl with water and put the floating cork inside. The side you rubbed against the magnet should points north
Printing:
- Scaled down to 40%
You can also find the 3mf. File with the added color change.
If you like to, check out my other designs too!