Qidi X-Max side drop shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compliments Elphwrkx front gap shield to prevent bolts from dropping/rolling past right or left floor to underside
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalist design, super easy print, no supports.
Holds itself in place with end forks.
Does not interfere with cable chain on right side, or removing/placing right/left panels. Fits both sides.
Prints corner to corner of bed diagonally as opened in file, and you'll need to turn off skirt and probably raft. Should manage small number of brim lines, but shouldn't be necessary.
Center cutout and reinforcement accommodates center vertical brace bar on limited serial number series of Maxes. May not fit cable chain side on those.
Slot piece in place with front side lowered first, then lower rear to capture the frame. Otherwise the side panel design against outside of inner frame prevents front forks from sliding down.
Unknown how it fits Max II