Thicker Base for Purge Container for Bambu Lab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thicker base that makes up for the wider gap created when the X1C comes with rubber feet.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 488
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thicker base for the long purge bucket. This re-mix base is 5.7mm thicker than the original.
Re-mixed from this one: https://www.printables.com/model/343821-purge-container-for-bambu-lab
Some X1C with AMS have rubber feet on the bottom, increasing the gap between bottom of the machine and the table top. This remix takes the previous purge bucket base and thickens it by 5.7mm to fill the gap underneath machines that come with rubber feet.
Remixed in meshmixer, so it's not the cleanest file.
Attribution does not go to me - swim upstream to find the original model and give attribution to that author.