WalkingPad X21 Bottleholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Selfcontained bottleholder for WalkingPad X21 foldable treadmill.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 988
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently bought a WalkingPad X21 treadmill which is a great product, but the minimalistic design lacks a good place to put a water bottle. I made this attachment to fit on the side of the handrail so it doesn't interfere with the LCD displays on top and can stay on when the treadmill is folded for storage.
It consists of 3 parts in 2 prints.The first is a 2-part sleeve that slips on the side of the handrail. It includes a little bit of the curvature which keeps it from slipping down. On the front each piece has half of a dovetail. The cupholder slots onto the dovetail and locks the sleeve in place. The cupholder has an inner diameter of 80mm, which fits my 0.8L sports bottle.
This is my first printable designed from scratch so it is a bit overengineered and not optimized at all. With my Ender 5 the final print fits snugly, but fit might depend on tolerances on your printer and if the treadmills have the same dimension on the handrails as mine.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
25%
Notes:
The sleeve is fairly tall and with little surface area, so if you have issues with first layer adhesion I recommend using a raft or brim or it might fall over. With a heated glass plate I only used a skirt with no problems.
The cupholder has some slots on the bottom that fits on endstops/strain relief on the sleeve, I recommend using supports for these overhangs.
Category: Sport & Outdoors