1 / 2
Spiral base for Cat Toy - Treat Dispenser Puzzle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for "Cat Toy - Treat Dispenser Puzzle" that uses less plastic and incorporates a spiral slow feeder design.
- Ocena
- 5 / 5
- Polubienia
- 148
- Pobrania
- 431
- Wydruki
- 12
- Wyświetlenia
- 2955
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 12) (Komentarze: 18)Remiksy (0)Kolekcje (177)Powiązane
I remixed the base of Cat Toy - Treat Dispenser Puzzle to use less plastic and reduce print times and print complexity. I also incorporated a spiral to act as a slow-feeder and increase cat engagement.
Prints with a 0.4mm nozzle at 0.25mm layer height with no infill!
Note: The TPU feet will not work with this base as the corners on the outside are not rounded.