Milwaukee M18 Battery 'clip'
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to allow me to hang my M18 Milwaukee cordless tools from the underside of shelves in my shop. Two…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 186
- Wydruki
- 1
- Wyświetlenia
- 1116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this to allow me to hang my M18 Milwaukee cordless tools from the underside of shelves in my shop. Two screws into the underside of the shelf, and you can stick the tool onto the clip, and it holds it relatively securely. You have to give it a bit of a yank to pull it off. There should be 2 different STL's. The larger one is the only one that will work, unmodified, for things like the circular saw and the jig saw, as there are bumps to prevent use of some older batteries.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
15"
Filament: No-name PETG Black
Notes:
I bumped up the thickness of walls and top/bottom to be over 1mm, just to make sure they're tough enough. I'll add photos after I install them in the next few days.
Category: Tool Holders & Boxes