Lightbar for Neptun 2/2s/3 and Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small light bar for top mount.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 304
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi.
I searched for a way to light up my printer.
My plan was to use some WS2812 RGB Led's. So i ordered 1m 144 RGB LED's from Aliexpress.
The only problem was, that i couldn't find a nice case for the LED's. So i designed my own.
The bar fits perfect under the top rail on my Neptun 2S.
There are 3 hooks for the bar that it can be mounted on the extrusion.
For better printability i designed the hooks separately and you just have to clue it in place.
Also you are free to move the cable through the extrusion.
For the lid i used transparent PETG with 0 top and bottom layers and 100% infil @ 20mm/s.
The structured PEI bed give it a good diffusion.
I used WS2812 addressable LED's from Aliexpress, controlled by an Arduino Nano and Klipper on Raspberry Pi.
Don't forget to like.