Wavlink Dual Display Dock Mount Pt. 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New Mount for the wavlink dual display docking station, because I have no life.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Made another mount for my docking station as I got a new ikea desk.
Unbeknown to me at the time of purchase, this desk has a metal frame that occupies much of the space under the desk.
I needed to be able to mount the docking station under my desk, accommodate this frame and keep the dock easily accessible. Hence the new mount.
As I wanted to be able to print this with minimal supports, the section that holds the dock does not extend very far. As such, please pay attention when positioning the mounts. There is no room for slack or gaps. Each side uses 2 3x20mm wood screws for mounting to the desk.
This was printed with Orange PETG, 20% infill, supports on build plate only. It took 2h 39m per stand. Reducing the infill didn't significantly reduce the time required.