1 / 3
Atomstack X7 control case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
When I got my x7, the original case has some issues. The face kept coming off (it's just glued on, and not very well). I used Fusion360 to design a new case for the remote board. I figured instead of having the face snap/glue on, I would attach it with screws. This will make sure it doesn't come off. I reused the magnets from the original case (use caution when removing them). They are pressed into the new case after heating it with a heat gun.
Parts Required:
- 4 - 4mm M3 threaded inserts
- 4 - M3x18 countersink screws
- 2 - 5x15 magnets (sourced from the original case)