1 / 1
MST MRX GT Gyro Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gyro Mount for MST MRX GT. Printed in ASA. 100% Infill.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Gyro Mount for the MST MRX GT R/C drift chassis.
It is sized to fit a Yokomo DP-302 v4 gyro, but should provide plenty of area for other types to mount foam tape. Secured with 2 small zip-ties.
Recommended print material: ASA/ABS
Recommended layer height 0.16mm
Recommended infill: 100%