1 / 1
Top and Bottom Thickness Gauge for Multi Color Prints
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these prints to make decisions about what thickness to use(# of walls and top layers) on multi color parts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Use these prints to make decisions about what thickness to use(# of walls and top layers) on multi color parts.
These are designed for 0.2mm layer heights and a 0.4mm nozzle size.
Top and Bottom Gauge is in 0.2mm increments: 0.2, 0.4, 0.6, 0.8, 1.0
Wall Thickness Gauge is in 0.4mm increments: 0.4, 0.8, 1.2, 1.6
Be sure to check the Strength→Detect thin walls check box. Or else the top of the model will be lost in bambu slicer.
Not checked:

Checked:
