Prusa i3 Z Rod Toppers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips to better hold the Z smooth rods in place.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Clips to better hold the Z smooth rods in place.
These simple add-on parts are for use on an original Prusa i3 with those "z-top" parts that have a hole, which may potentially allow the smooth rods to move up and down. Clipping these onto the "z-top" parts will prevent the smooth bars from moving.
Print instructions
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.2mm
- Infill: 100%
Notes
These print well in either PLA or ABS. Supports are built-in, so no need to add them.
How I Designed This
These parts were made in OpenSCAD. You can customize the SCAD file to tailor them to your needs. The included STL files will be fine if your smooth bars are the perfect length, but you should set leftExtraSlot or rightExtraSlot if a bar sticks up above the Z top.
To use the "ztopper_both_in_situ" option in the SCAD file, you will need to download and unzip the data.zip file in the same folder as the SCAD file. It contains a data folder with the z-top-left.stl file.