1 / 4
All-In-One Wemos Module
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your old iPhone charging brick to make an all-in-one Wemos station. Includes room for a USB cable and accessory.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An All-In-One Wemos Module
I wanted a tidy way to mount some Wemos weather stations (using the AHT10) for Home Assistant and couldn't find anything that didn't require USB cable dangling around everywhere. This plugs into the wall and keeps everything neatly contained.
Parametric F3D file included!
Features:
- Uses an old iPhone charging brick (you probably have a few lying around)
- Brick can be installed in any orientation, so the module can hang from your outlet vertically or horizontally
- Includes enough room inside for: charging brick, USB cable, Wemos D1, an accessory
- Plenty of ventilation for heat and air exchange
Printing:
- No supports needed
- Print lid with vents on the build plate
- Print box with the power brick hole on the build plate
Other Notes
- Depending on your printer tolerances, you might want to add a little tape to the lid, but the tabs keep everything secure on mine
- The long fins on the lid keep your power brick in place
- The shorter your USB cable, the better!